Danfoss vlt soft starter mcd 500 설치 지침 매뉴얼 - 페이지 5
{카테고리_이름} Danfoss vlt soft starter mcd 500에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss vlt soft starter mcd 500 6 페이지. Usb module
Danfoss vlt soft starter mcd 500에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (17 페이지), 설치 지침 (5 페이지)
페이지 인쇄
Installation Instructions
4.5 Packing List
175G9007
1)
MCD 200
6 finger guards (rubber)
2 retaining brackets
1 installation instructions
–
–
–
–
Table 4.3 Packing List MCD 200, MCD 500 Enclosure Size G2, MCD 500 Enclosure Size G3B, and MCD 500 Enclosure Size G4B
175G5663
MCD 500 G3C enclosure size
3 finger guards (rubber)
1 finger guard cover
1 finger guard chassis
1 clamp plate
11 M4x10 screws
1 installation instructions
–
–
–
Table 4.4 Packing List MCD 500 Enclosure Size G3C, MCD 500 Enclosure Size G4C, and MCD 500 Enclosure Size G5C
1) Only 1 kit required.
2) Each kit is only sufficient for protection of either top or bottom cable terminals. If both top and bottom cable termination is used, 2 finger guard kits
are required.
MI17A602
Finger Guards
®
VLT
Soft Starter MCD 200/MCD 500
175G5662
1)
MCD 500 G2 enclosure size
6 finger guards (rubber)
2 retaining brackets
4 M4x10 screws
6 cable ties
1 installation instructions
–
–
175G5664
2)
MCD 500 G4C enclosure size
1 finger guard grille
1 finger guard cover
1 finger guard base chassis
2 finger guard side chassis
1 gland plate
6 M4x10 screws
12 M4x16 screws
2 M4 nuts
1 installation instructions
Danfoss A/S © 04/2016 All rights reserved.
175G5730
1)
MCD 500 G3B enclosure size
9 finger guards (rubber)
9 retaining brackets
2 finger guard plates
18 M4x14 screws
12 M4x12 screws
1 installation instructions
–
2)
1 finger guard grille
1 finger guard cover
1 finger guard chassis
1 gland plate
12 M4x10 screws
1 installation instructions
175G5731
MCD 500 G4B enclosure size
12 finger guards (rubber)
12 retaining brackets
2 finger guard bracket
2 finger guard cover
24 M4x16 screws
12 M4x12 screws
1 installation instructions
175G5665
2)
MCD 500 G5C enclosure size
–
–
–
1)
5