Danfoss VLT Soft Starter MCD 600 설치 매뉴얼 - 페이지 5

{카테고리_이름} Danfoss VLT Soft Starter MCD 600에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss VLT Soft Starter MCD 600 20 페이지. Modbus rtu card
Danfoss VLT Soft Starter MCD 600에 대해서도 마찬가지입니다: 설치 매뉴얼 (2 페이지), 설치 매뉴얼 (20 페이지)

페이지 인쇄
Danfoss VLT Soft Starter MCD 600 설치 매뉴얼
Installation Guide | DeviceNet Card

2 Installation

2.1 Installing the Expansion Card

Procedure
1. Push a small flat-bladed screwdriver into the slot in the center of the expansion port cover and ease the cover away from the soft
starter.
2. Line up the card with the expansion port.
3. Gently push the card along the guide rails until it clicks into the soft starter.
Example:
1
Illustration 1:
Installation of the Expansion Cards

2.2 Connecting to the Network

Prerequisites:
The expansion card must be installed in the soft starter.
Procedure
1. Connect field wiring via the 5-way connector plug.
The DeviceNet card is powered via the connector.
Danfoss A/S © 2018.10
2
Installation
AQ277154750780en-000102 / 175R1182 | 5