Danfoss iC7 Series 설치 매뉴얼

{카테고리_이름} Danfoss iC7 Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss iC7 Series 16 페이지. In-bottom/out-back cooling kit for fa09-fa10, frequency converters
Danfoss iC7 Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (8 페이지), 설치 매뉴얼 (8 페이지), 설치 매뉴얼 (6 페이지), 설치 매뉴얼 (14 페이지), 설치 매뉴얼 (16 페이지), 설치 매뉴얼 (8 페이지), 설치 매뉴얼 (8 페이지), 설치 매뉴얼 (10 페이지), 설치 매뉴얼 (16 페이지), 설치 매뉴얼 (6 페이지), 설치 매뉴얼 (6 페이지), 설치 매뉴얼 (16 페이지), 설치 매뉴얼 (18 페이지)

Installation Guide

In-bottom/Out-back Cooling Kit for FA11-FA12

iC7 Series Frequency Converters

1 Overview

1.1 Description

The in-bottom/out-back cooling kit fits FA11 and FA12 frequency converters mounted in Rittal TS8 cabinets with widths of 600 mm

(24 in) or 800 mm (32 in). When the kit is installed, air flows into the bottom duct and out through the back duct of the frequency

converter. See

Illustration

Illustration 1: Direction of Airflow with Kit Installed

Top cover

Frequency converter

Bottom duct assembly

1.2 Kit Numbers

Use these instructions with the following kits.

Table 1: In-bottom/Out-back Cooling Kits

Number

Kit description

176F4059

In-bottom/out-back cooling kit for FA11 in 600 mm (24 in) cabinet

176F4193

In-bottom/out-back cooling kit for FA11 in 800 mm (32 in) cabinet

176F4060

In-bottom/out-back cooling kit for FA12 in 800 mm (32 in) cabinet

1.3 Items Supplied

The following parts are contained in the kit.

Back channel airflow (intake)

Back channel airflow (exhaust)

Mounting plate

AN361429392581en-000201 / 136R0253 | 1