AOK TX2056A 매뉴얼 - 페이지 15
{카테고리_이름} AOK TX2056A에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AOK TX2056A 18 페이지. Rc weather station with bbq weather display and outdoor sensor
페이지 인쇄Resetting the weather station
Use a sharp object to press
Troubleshooting
Problem
Device cannot receive WWVB
signal for the time.
Display screen not working.
The
temperature
from
sensor seems to be too high.
The display shows HH, LL,
HH.H or LL.L instead of
measured values for
temperature or humidity.
The base unit is not receiving
any signal from the wireless
sensor.
The display is illegible, the
function is not clear or the
values are clearly wrong.
Cleaning
Wipe the base unit with a slightly damp cloth when required.
Technical Data
Base unit
Model no.: AOLD-5080A
Batteries: 3 x LR6 (AA) / 1.5 V
Temperature measuring range: 0°C ~ 50°C (32°F ~ 122°F)
RESET
button to restart the weather station.
Possible cause and remedy
- Check the chosen location
- Start radio reception manually if necessary
- Set the time manually
Check the batteries in main unit are inserted is plugged in correctly
the
- Check if the sensor is exposed to direct sunlight.
- The values are above or below the measuring range, see Technical
Data.
- Make sure that there are no electrical sources of disturbance near
the wireless sensor or the base unit.
- Check the batteries in the sensor.
- Start the search for the wireless sensor manually: Press and hold
CH
the
button on the base unit until the display for the weather
information flashes
- Move the base unit closer to the sensor or vice versa.
- Reset the weather station to the factory settings