AOK TX2059A 빠른 시작 매뉴얼 - 페이지 3
{카테고리_이름} AOK TX2059A에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AOK TX2059A 11 페이지.
페이지 인쇄35. Outdoor humidity trend
1
Temperature display
2
Radio frequency display
3
Current transmission channel
4
Humidity display
5
Low battery indicator
6
Red pilot light
7
Battery compartment
8
Battery compartment cover
9
Loop for hanging
10
Sliding switch 1 2 3: Set sensor number (transmission channel)
How to set up
Insert batteries
1. Insert 2 x AA batteries into the wireless sensor. Pay attention to the correct polarity.
While the sensor is transmitting, the red LED indicator will flash.
2. Open the battery compartment of the weather station and insert 2 x AA batteries in the
correct polarity. Close the battery compartment.
Setting the air pressure at the location
When the weather station is connected to the batteries on the first time, it will enter the air
pressure mode. You will see the Rel unit starts to flash. Now you can set the relative
pressure through +/12/24 and -/RC button. You can follow below steps.
5