Dunavox DAUF-40.138SS 사용 설명서 - 페이지 8
{카테고리_이름} Dunavox DAUF-40.138SS에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dunavox DAUF-40.138SS 15 페이지.
페이지 인쇄
For Dual Zone
Upper zone temp.
1
Upper zone
2
o C
3
o F
4
Lower zone
5
Lower zone temp.
6
For Triple Zone
The Control Panel of upper zone is same as Single
Zone above;
The Control Panel of Mid Zone and Lower Zone is
same as Dual Zone above.
POWER ON/OFF CONTROL
When the appliance is plugged in to a power outlet, it
powers on automatically.
Touch the power mark
to turn off (or turn on) the appliance.
No matter it is under a locked or unlocked condition,
you can turn off the appliance by touching the power
mark
and holding for 10 seconds.
UNLOCKING THE CONTROL PANEL
To unlock the control panel, touch the power mark
and lighting mark with 2 fingers at the same time and
hold for 3 seconds . When unlocked a buzz sound will
be heard. The control panel will be automatically
locked with a buzz sound heard after 10 seconds
without being touched. Under the locked condition,
the control panel will not react to any touching order
for Lighting On/Off and Temperature Setting.
INTERIOR LIGHTING ON/OFF CONTROL
Under the unlocked condition, touch the lighting mark
to turn on (or turn off ) the interior cool LED
lighting. The lighting will stay on until it is manually
turned off.
TEMPERATURE DISPLAY WINDOW
The temperature is displayed in digital format which is
the best way to be read out. The display shows the
set
temperature
when
Compre
7
ssor
Lock
8
Silent
9
mode
Display
10
Overheating
11
warning
and hold for 10 seconds
you
are
setting
temperature, and it will change to be the real
temperature of the inside cabinet after 10 seconds
When the temperature probe is out of order, the
display will show "HH" or "LL" instead of a digital figure
while continuous buzz sound will be heard. In such
case the wine cooler keeps on cooling as it is
considerately designed to keep periodical running of
compressor and fans which helps to keep the
coldness of the inside cabinet to protect your stored
wines.
TEMPERATURE RANGE SETTING
For Single Zone
The default temperature setting range is E: + 5 to
+20ºC (41-68 ºF).
To set a temperature range as desired, pls.make sure
the control panel is under locked condition.
Press the
will flash "E"--"F"--"H"--"L" in loop with a sound of
beep by every pressing. Leave the window flashing
for 3 seconds. Beep sound will confirm the setting.
E (default)
For Dual Zone
The default temperature setting ranges are E: +5 to
+12 ºC (41-54 ºF) for the upper zone and +12 to +20
ºC (54-68 ºF) for the bottom zone.
To set a temperature range as desired, pls.make sure
the control panel is under locked condition.
Press the
windows will flash "E"--"F"--"H"--"L" in loop with a
sound of beep by every pressing. Leave the display
windows flashing for 3 seconds with a sound of beep
to confirm the setting.
Display
(default)
For Triple Zone
The temperature setting range of upper zone is same
as Single Zone above;
The temperature setting range of Mid Zone and Lower
the
Zone is same as Dual Zone above.
mark for 3 seconds, the display window
Display
Temperature range
+ 5°C - +20°C
F
+ 2°C - +20°C
H
+ 10°C - +19°C
L
+ 0°C - +20°C
mark for 3 seconds, the display
Temperature range (double zone)
Upper zone
E
+5°C - +12°C
F
+2°C - +12°C
H
+5°C - +12°C
L
+2°C - +10°C
Lower zone
+12°C - +20°C
+12°C - +20°C
+8°C - +19°C
+12°C - +20°C