cashco 521 설치, 운영 및 유지보수 매뉴얼 - 페이지 17
{카테고리_이름} cashco 521에 대한 설치, 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. cashco 521 20 페이지. Total tfe, globe-pattern control valve body iom
페이지 인쇄
VIII.
ORDERING INFORMATION:
NEW REPLACEMENT UNIT vs PARTS "KIT" FOR FIELD REPAIR
To obtain a quotation or place an order, please retrieve the Serial Number and Product Code that was stamped
on the metal name plate and attached to the unit. This information can also be found on the Bill of Material
("BOM"), a parts list that was provided when unit was originally shipped. (Serial Number typically 6 digits).
Product Code typical format as follows: (last digit is alpha character that reflects revision level for the product).
NEW REPLACEMENT UNIT:
Contact your local Cashco, Inc., Sales
Rep re sen ta tive with the Serial Number and Product
code. With this information they can provide a
quotation for a new unit including a complete
description, price and availability.
Do not attempt to alter the original construction of any
unit without assistance and approval from the factory.
All purposed changes will require a new name plate
with appropriate ratings and new product code to
accommodate the recommended part(s) changes.
PARTS "KIT" for FIELD REPAIR:
Contact your local Cashco, Inc., Sales
Rep re sen ta tive with the Serial Number and Product
code. Identify the parts and the quantity required
to repair the unit from the "BOM" sheet that was
provided when unit was originally shipped.
NOTE: Those part numbers that have a quantity indicated
under "Spare Parts" in column "A" reflect minimum
parts required for inspection and rebuild, - "Soft
Goods Kit". Those in column "B" include minimum
trim replacement parts needed plus those "Soft
Goods" parts from column "A".
If the "BOM" is not available, refer to the cross-
sectional drawings included in this manual for part
identification and selection.
A Local Sales Representative will provide quotation
for appropriate Kit Number, Price and Availability.
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be
construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. We reserve the right to
modify or improve the designs or specifi cations of such product at any time without notice.
Cashco, Inc. does not assume responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use and maintenance of any
Cashco, Inc. product remains solely with the purchaser.
IOM-521
–
CAUTION
SECTION VIII
7
–
TO RETURN A VALVE FOR REPAIR: (RGA)
Before returning this Model - Contact Cashco Inc.
for permission to return the unit (as a whole or
any part of) and to obtain an "RGA" identification
number. This number must be marked clearly on the
outside of the returned container. In addition, affix
to the outside of the container a signed statement
attesting to the fact that the valve and/or parts has
been flushed out for a specific period of time using
an "OSHA"acceptable neutralizing agent. The name
of the agent, the manufacturer's company name
and the total concentration level must be included
for both the valve service medium, as well as the
neutralizing agent.
NO returns will be accepted at Cashco Inc. without
an M.S.D.S. (Material Safety Data Sheet) affixed to
the outside of the returned container.
17