Aolait 12x30w Led Moving Bar RGBW 4 in 1 light. 사용자 설명서 - 페이지 16

{카테고리_이름} Aolait 12x30w Led Moving Bar RGBW 4 in 1 light.에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aolait 12x30w Led Moving Bar RGBW 4 in 1 light. 17 페이지.

페이지 인쇄

9. Failure and repair

Failure

Lamp does

not light,

the lamp

does not

work

Low brightness of the lamp * Check if the mirror and lens are dusty or damaged.

Not controlled by DMX

signals

Scanning action is out of

step

No voice control in voice

mode

10. Product care and cleaning

lease pay attention to the following points when testing this product:

1. All screws and components of the installed product must be tightly connected and should

not rust.

2. The outer casing, lens, fixing parts and installation location (suspension, truss, etc.) cannot

be deformed

3. Mechanical moving parts must not be worn and cannot rotate unbalancedly.

4. The power cord must not have any damage, and the appearance of the material is

damaged.

The installation and use of the product must be carried out by trained professional

technicians, and it must be ensured that safety risks are eliminated.

Solution

* Check the power cord, if the fuse is damaged, if damage, please

replace the relevant accessories; if there is still a problem after the

replacement, find the song lighting or professional maintenance

* Check if the voltage is normal

*Check the connected signal cable for poor contact or damage

*Check if the DMX address is set correctly

*Check if it is disturbed by surrounding high voltage wires

* Check if each stepper motor can rotate freely. If there are other

problems, you should find a song.

Lighting or professional repair

*Enlarge the sound of the sound or tap the MIC microphone with

your finger. If you still have no voice control, you should look for it.

Aolait lighting for professional repair