Aolait ALED BSW CMY 400 사용자 설명서 - 페이지 13

{카테고리_이름} Aolait ALED BSW CMY 400에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aolait ALED BSW CMY 400 20 페이지.

Operation and parameter instruction

Via following operation, enter sub menu(parameter menu) shown in Figure 6

In main menu, chick 1/6 function button into corresponding parameter menu.



In sub menu(page), chick main item on the left side of displayer, can shift to corresponding



sub menu(page) quickly.

2.3.1 ADDR--> Address: Set DMX Address

Click and select the "ADDR", can enter the page of DMX address setting, range from 1 to 512, the

address code shouldn't is not greater than (512- channels quantity), otherwise the light will not

been controlled. Following is the operation:

Enter the page of DMX address, as shown in Figure 7, click the blank area in right side of display

will pop-up diglog as in Fig. 4, modify value, then click 'ENTER' to confirm and save DMX address

code.

2.3.2 MODE--> WorkMode: Set Light work mode

Enter the page of 'WorkMode' as shown in Figure 8 and modify setting. Can set light work mode,

control lamp and DMX channel mode.

Figure 6 Parameter menu

Figure 7 page of DMX Address