CashConcepts CCE 315 BASE 빠른 시작 매뉴얼 - 페이지 13

{카테고리_이름} CashConcepts CCE 315 BASE에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CashConcepts CCE 315 BASE 15 페이지.

CashConcepts Europe GmbH

Kemptener Straße 99 – D-88131 Lindau / Germany

Tel.: +49 (0)8382 – 943 15 – 0 / Fax: +49 (0)8382 – 943 15 – 20

Email: [email protected] / Web: www.cce.tm

Adjustment wheel for pressure of banknotes

By transporting the machine and also by wear the pressure of the Feeder rollers on the banknotes may change over time. This

may lead to errors if the notes were not properly passed to the sensors and also that several banknotes were drawn in at once.

To adjust the feeder you need a nearly brand new banknote. From handling the 10 Euro banknote is the best to adjust the

machine.

Turn off the banknote counter and place the feeding rollers by

turning the two big transport rollers in the hopper compartment in a

position that the rubber parts are not visible.

Slide the note slowly between the outer feed rollers. The bill should

pass - after a soft resistance - between the wheels.

Slides the note without resistance through the feeder, it is opened

too wide. Press the wheel on the back of the machine down and turn

it toward the minus sign.

Is the resistance of the wheels to strong and the note can not slide

through the Feeder, the pressure is set too high. Press the wheel on

the back of the machine down and turn it in the direction of the plus

sign.

Adjust the pressure in small steps to get an optimum result.

Included and optional accessoires

Included accessoires:

CCE 315 BASE

Optional erhältlich:

Externes Display

230 V plug EU

Thermodrucker

Staubschutzhülle

Manual

Reinigungskarten

Druckluftspray