CashConcepts LXD 50 사용자 설명서 - 페이지 7
{카테고리_이름} CashConcepts LXD 50에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CashConcepts LXD 50 10 페이지.
CashConcepts LXD 50에 대해서도 마찬가지입니다: 사용자 설명서 (2 페이지)
페이지 인쇄CashConcepts Europe GmbH
Kemptener Straße 99 – D-88131 Lindau / Germany
Tel.: +49 (0)8382 – 943 15 – 0 / Fax: +49 (0)8382 – 943 15 – 20
Email: [email protected] / Web: www.cce.tm
Setup / User Mode
1.
Press
6/SETUP
key to enter the user mode.
2.
Move to the required content by using the ▲▼keys. (
START/STOP
key to choose the content or press
3.
After choosing the content the target content will be highlighted in yellow color.
4.
After changing the data press
No.
Contents
1
Reject Size
2
Ext – Device
3
Density
4
User ID
5
Language
6
RTC
7
Reject Disp.
8
CF Disp.
9
Count
10
Speed
11
User I/F
12
Counting Disp.
*
CLEAR
8/SAVE
key to save them, otherwise the data will remain unchanged.
Set Maximum Reject note capacity from 10 to 100
Set the external Device between external display
and printer (refer to the detailed setting)
Set the density level from -4 to 9 or AUTO for
count mode only. Lower value is less sensitive and
higher value is more sensitive setting.
Set the USD ID shown in print
(refer to the detailed setting)
Set the language shown in display
Set the Date and Time (refer to the detailed setting)
Set the reject No. display function as ON or OFF
Set the CF display function as ON or OFF
Set the counting start function as AUTO or
MANUAL
Set the counting speed of the machine
Set the PC Interface NONE or USER 1
Set the denomination display function as ON or OFF
shows the actual selected content) and then press
key to exit the mode.
Description
Default Setting
50
EXT-DISPLAY1
AUTO
-----
ENGLISH
-----
ON
OFF
AUTO
1000
NONE
OFF