Dunavox DAB-42.117DB 사용 설명서 - 페이지 7

{카테고리_이름} Dunavox DAB-42.117DB에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dunavox DAB-42.117DB 17 페이지.
Dunavox DAB-42.117DB에 대해서도 마찬가지입니다: 사용 설명서 (13 페이지), 사용 설명서 (15 페이지), 매뉴얼 (15 페이지)

페이지 인쇄

1. Product Features

1. Remove the bottom hinge ①, by unscrewing the

four lock screws ②,Be careful to hold the door

firmly after removing the screws.(Fig. 1)

2. Gently pull down to remove the glass door from

the right top hinge and place it on a padded

surface to avoid the risk of damage. Then remove

the right top hinge ⑨, (Fig. 4)

3. Pop out the cover caps on the left side of cabinet

and use them to

cover the screw holes on the right

hand side.

4. Screw the alternative left top hinge ⑧ , included

in the fittings,

on the left hand side of cabinet. (Fig.

5. Unscrew and transfer door supporter ⑩ ,to the

opposite side. At the same time remove the

stopper pin ⑦,of bottom hinge to the opposite

designated position or unscrew and transfer the

hinge pin ⑦

of bottom hinge to the opposite

designated position. (Fig. 5 & 3)

6. Unscrew and transfer the door adapter ⑤ ,and

lock catch ④,to the top designated position of

glass door. (Fig. 2)

7. Rotate the door 180° and relocate the glass door

to the designated position.

bottom hinge on the left designated position and

tighten it. (Fig. 5)

8. Recheck and adjust the door alignment by

loosening the screws ⑥ ,and moving the door

adapter ⑤, Tighten the screws ⑥,after the door

is levelled. (Fig. 5)

DESIGN 4 – For double door models

Remove the bottom hinge ①, by unscrewing the

four screws ②,Be careful to hold the lower glass

door ③ ,firmly after removing the screws. And

then gently pull down to remove the lower glass

door from the middle hinge and place it on a

padded surface to avoid the risk of damage. (Fig.

Then screw the

Unscrew and transfer the door adapter ④,and ⑦

, to the designated opposite position of lower

glass door. (Fig. 2)

Remove the door adapter ⑭, by unscrewing the

two lock screws ⑬, Be careful to hold the upper

glass door firmly after removing the screws. And

then gently pull down to remove the upper glass

door ⑮, from the top hinge and place it on a

padded surface to avoid the risk of damage. Then

remove the right top hinge

⑩,.(Fig. 5 & 4)

Unscrew and transfer the middle hinge ⑫, and

the middle fixing plate ⑪, to the

opposite position. (Fig. 5)

Pop out the cover caps on the left side of cabinet

and use them to

right hand side.

Screw the alternative left top hinge ⑨, included

in the fittings,

on the left hand side of cabinet.

(Fig. 4)

Relocate the door adapter ⑭, on the middle

hinge.

Set the upper glass door to the designated

position and install the two lock screws to

connect the door adapter ⑭, with the upper

glass door and tighten them before the door is

leveled.

Set the lower glass door to the designated

position and reassemble the bottom hinge.

10. Recheck and adjust the lower door alignment by

loosening the screws ⑤, & ⑥ and moving the

door adapter ④,& ⑦, Tighten the screws ⑤, & ⑥

, after the door is levelled. (Fig. 5)

11. Transfer the handles and plugs to the opposite

positions.

OPERATING YOUR APPLIANCE

This appliance is designed for operation at certain

ambient temperatures. The climate class is specified

on the rating plate.

The appliance may not work properly if it is left for a

long period at a temperature outside the specified

range. For example, placing your unit in extreme cold

or hot conditions may cause interior temperatures to

fluctuate. The range between 5ºC and 22ºC (41ºF and

72ºF) may not be reached.

cover the screw holes on the