CashConcepts CCE 1000 NEO 매뉴얼 - 페이지 10

{카테고리_이름} CashConcepts CCE 1000 NEO에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CashConcepts CCE 1000 NEO 19 페이지.

CashConcepts Europe GmbH

Kemptener Straße 99 – D-88131 Lindau / Germany

Tel.: +49 (0)8382 – 943 15 – 0 / Fax: +49 (0)8382 – 943 15 – 20

Email: [email protected] / Web: www.cce.tm

Setting the functions

You can adjust the CCE 1000 NEO to your business needs as follows:

Output direction of the banknotes

Hold pressed the CLR / ▲▼– button for around 3 seconds to change the output direction of accepted banknotes. The

banknotes can be ejected either to the front or rear. Suspected banknotes are generally ejected forward. The display shows

the selected output direction indicated by the two arrows on the display.

Currency display / currency selection

Please choose first the currency you want to test. Therefore you keep the CUR button pressed for around 3 seconds to

switch between EURO (€) and the second local currency (LOC). The chosen currency will be display in the upper left display

area.

Please note that not all currencies can be detected in all four longitudinal directions. This is due to the position of the security

features on the banknotes, and can't be influenced by us. If a banknote is not insert in the specified direction and / or position

(e.g. left side), the note is rejected as suspicious.

Note Swiss Franc (CHF): The Swiss Franc has to be inserted with the image on the top on the left side in the feeder slot to

be detected correctly.

The CCE 1000 NEO can be updated via a special update stick if a new software is needed. Instructions for updating is then

attached to the update stick. The stick is not included to the unit and must be ordered separately.

Information about updates and currency software you will find on our webpage www.cce.tm

Please note that it is necessary to use the power supply for the update procedure. You can't update the

machine in battery mode.