Dunavox DX-28.88K 사용 설명서 - 페이지 8

{카테고리_이름} Dunavox DX-28.88K에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dunavox DX-28.88K 8 페이지. Compressor driven
Dunavox DX-28.88K에 대해서도 마찬가지입니다: 운영 매뉴얼 (8 페이지)

페이지 인쇄
Dunavox DX-28.88K 사용 설명서

TROUBLESHOOTING

If you feel the appliance is out of order, follow these instructions to try to see if you can solve the problem
simply by yourself before calling for service.
No.
No.
No.
No.
PROBLEM
PROBLEM
1
The wine cooler does not operate
2
The wine cooler is not cold enough
Automatically turn-on and
3
turn-off frequently
4
The lighting does not work
5
Too much vibration
The wine cooler seems to make
6
too much noise
7
The door will not close properly.
The display window is shown with "HH"
8
or "LL" instead of a digital figure,
and/or with continuous buzz sound.
PROBLEM
PROBLEM
INSTRUCTION MANUAL
PROBLEM POSSIBLE CAUSE / MEASURE
PROBLEM POSSIBLE CAUSE / MEASURE
PROBLEM POSSIBLE CAUSE / MEASURE
PROBLEM POSSIBLE CAUSE / MEASURE
Not plugged in.
The appliance is turned off.
The circuit breaker tripped or a blown fuse.
Check the temperature control setting.
External environment may require a higher setting.
The door is opened too frequently.
The door is not closed completely.
The door gasket does not seal properly.
The room temperature is hotter than normal.
A large amount of contents has been added to the wine cooler.
The door is opened too frequently.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
Not plugged in.
The circuit breaker tripped or a blown fuse.
The lighting is turned off.
Check to assure that the appliance is level.
Check to assure no parts inside the cabinet or in the compressor
chamber are loose.
The rattling noise may come from the flow of the refrigerant, which is
normal.
As each cycle ends, you may hear gurgling sounds caused by the flow
of refrigerant.
Contraction and expansion of the inside walls may cause popping and
crackling noises.
The appliance is not level.
The wine cooler is not level.
The door was reversed and not properly installed.
The gasket is dirty.
The shelves are out of position.
The temperature probe is out of order.
8