Aolin AL-630 빠른 시작 매뉴얼

{카테고리_이름} Aolin AL-630에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aolin AL-630 2 페이지. Remote control 2-way motorcycle alarm system

페이지 인쇄

2-WAY MOTORCYCLE ALARM SYSTEM

2-Way Motorcycle alar m system

Function Key

A r m :

Disarm:

Locate motor:

Remote Start Engine:

Function Operation

1. Arm/Mute arm: Press the button

ARM mode. If move the motorcycle or ignition on, the siren will sound and the direction lights will

flash, the engine will be locked at the same time. And the remote controller will beep and show

icons in LCD display. Press any button, the icons will be removed.

2. Disarm: Press the button

twice, the motorcycle is in the DISARM status.

3. Locate motor: Press the button

8 times, and you can know where your motorcycle is.

4. Remote Start Engine: Press the button

button

for 3.5s, turn on the background light. After starting the engine by remote controller, the

engine will be on until you stop it by remote controller. You can drive the motorcycle without using

the key, so make sure no other people can get access to you motorcycle when using this function.

5. Adjust Sensitivity: Adjust the sensitivity on the mainframe by hand, turn clockwise to increase

sensitivity, turn anti-clockwise to decrease sensitivity. The sensitivity has been adjusted well when

leaving factory.

6. Remote Cut off Engine: When the engine is running, press the button

(Please kindly note that remote starting engine is to remote cutting off engine.)

7. Anti-robbery and assistance: When the motorcycle is robbed and driven away, the owner-

driver can stop it by pressing the button

lights will flash at the same time.

8. Code Learning: In disarm mode, put the motorcycle key in the key lock and turn it from ACC

OFF to ACC ON, 3 times in 3s, when the lights flash and the siren beeps once, press any button on

the remote controller within 10s, the direction lights will flash once, it means the system learn the

Code of the remote controller. The other remote controller can be learnt code in the same way.

( The code has been learnt well before leaving factory, the user need not learn it again if

unnecessary.)

Remark: one mainframe could learn at most two remote controllers once.

9. Keyboard lock : Press the buttons

keyboard ; press these two buttons for 3.5s again to unlock the keyboard.

All manuals and user guides at all-guides.com

REMOTE CONTROL

[

AL-630 ]

Illegally starting alarm

once, the siren will beep once , the alarm system is in

once, the siren will give 2 beeps, the direction lights would flash

once, the direction light will flash 8 times, the siren will beep

twice within 3s to start the engine. Press on the

once, the siren will sound urgently and the direction

and

at the same time and hold for 3.5 s to lock

Shocking alarm

Disarm/Iginition off

Arm/Anti-robbery

Shocking alarm

Assistant function

once to stop the engine.

Locate motor

Remote start/open light

Illegally starting alarm

Keyboard lock

Sending signal

Disarm

Arm

Battery