CashConcepts CCE 4000 사용자 설명서 - 페이지 10
{카테고리_이름} CashConcepts CCE 4000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CashConcepts CCE 4000 11 페이지.
CashConcepts CCE 4000에 대해서도 마찬가지입니다: 짧은 설명서 (2 페이지)
페이지 인쇄
CashConcepts Europe GmbH
Kemptener Straße 99 – D-88131 Lindau / Germany
Tel.: +49 (0)8382 – 943 15 – 0 / Fax: +49 (0)8382 – 943 15 – 20
Email: [email protected] / Web: www.cce.tm
Transport brush / Coin counter
The transport brush is designed to count 900,000 coins. After 400.000 coins you will receive the following message:
POS
2
The transport brush must then be switched to the second position in order to compensate for the abrasion caused by the
transport of the coins. To do this, open the machine cover as described in the cleaning section and press the transport brush
vertically, then rotate the transport brush clockwise to the second position. Close the cover and confirm the above message with
START / STOP.
After 900,000 coins the transport brush has to be exchanged. You will then receive the error message:
BRUSH
If this is the case, please contact your dealer to order the appropriate wear part and the replacement instruction.
Change the fuse
The CCE 4000 is protected by a fuse, which can be exchanged by you without any great effort.
Please turn off the machine before removing the fuse and unplug the power cord from the unit. Otherwise there is a risk of life
due to electrical shock.
Remove the fuse cover and replace the fuse with an equivalent fuse. The lock of the fuse must be firmly pressed again after
changing.
Postion 1
Position 2