CashConcepts CCE 4000 사용자 설명서 - 페이지 6

{카테고리_이름} CashConcepts CCE 4000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CashConcepts CCE 4000 11 페이지.
CashConcepts CCE 4000에 대해서도 마찬가지입니다: 짧은 설명서 (2 페이지)

페이지 인쇄

CashConcepts Europe GmbH

Kemptener Straße 99 – D-88131 Lindau / Germany

Tel.: +49 (0)8382 – 943 15 – 0 / Fax: +49 (0)8382 – 943 15 – 20

Email: [email protected] / Web: www.cce.tm

Settings in the setup menu

In the standard display, press the SET button to enter the setup menu. Press the START / STOP button to exit the setup menu at

any time.

Batch value setting

The first setting in the setup menu is the point under which you can specify the batch value / counting stop for the individual coin

boxes. The following is displayed: the upper value indicates the value of the selected coin, the lower value is the set count stop at

which the machine should stop counting. The value zero means that no counting stop is desired.

€

0.01

BAT

No batch stop at 1 Cent coin

Press the PRINT key to toggle between the counting stops of the individual coin types. Use the "+" and "-" buttons to adjust the

values. If you press and hold the "+" or "-" buttons, the value will be increased/decreased in steps of 10 steps. Press the CLEAR

key to delete a set count stop. Press and hold the CLEAR button for approx. 2 seconds to clear all set count stops.

If the counting stop of a coin type is reached, the machine stops the counting process and you receive the following display:

€

2.00

BAT ON

Counting stop at 2.00 Euro of 30 coins reached

Press the START / STOP button to resume counting.

€

0.02

BAT

Counting stop after 50 coins of 2 Cent