3SIXT 3S-1186 사용 설명서 - 페이지 6

{카테고리_이름} 3SIXT 3S-1186에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3SIXT 3S-1186 13 페이지. Smart car mount

Attaching the mount – vent mount

1. Locate a suitable clear and clean vent within the

car dashboard area. Ideally this will be closest to

the driver left or right side.

2. Activate the spring-loaded button on the vent

mounting system to open the pincer with

forefinger and thumb.

3. Slide the separated pincer between a vent blade.

4. Once in the ideal position release the spring-

loaded button to secure in place.

Removing the mount – vent mount

1. Activate the vent mount release button between

forefinger & thumb.

2. Slide out the separated pincer making sure not to

touch the vent blade/s.

Charging takes place upon full contact of the

smartphone to the face of the mount itself.

1. Press the power button to power on the 3SIXT Qi

Wireless Charger Smart Car Mount.

2. Press the touch pad button to activate the arm

clamps into the open position.

3. Place your Apple or Samsung smartphone onto

the face of the mount. Once within range (between

6-8mm) the wireless charger will automatically

activate via Qi wireless technology.

4. Adjust the feet up or down to get a centrally

position of your device on the mounting system.

5. By covering the centrally positioned IR sensor, the

clamp arms will automatically close to the size of