AOM WS001 사용자 설명서 - 페이지 10

{카테고리_이름} AOM WS001에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AOM WS001 19 페이지. Color weather station

Wireless connection to the outdoor sensor

Press and hold the key "SEARCH" for 3 seconds to search for outdoor sensor .

Illumination

1.Press the key "SNOOZE/LIGHT" to activate the display illumination for

5 seconds.

2.There are 3 levels of the light by pressing the "SNOOZE/LIGHT" button when

AC power on:Off backlight, Light on, More bright light

1.Insert batteries into the weather station (3 x AAA,LR03,1.5V),connect the 4.5V

AC adaptor and then into the wireless sensor (2 x AAA,LR03,1.5V).When

inserting the batteries make sure the polarity is correct to avoid damaging the

weather station or sensor.

2.Place the two units next to each other. The weather station finds signal from the

remote sensor in 3 minutes. If it is not found, press and hold the "SEARCH"

button to repeat the search

3.If the outdoor temperature and humidity on the display disappears, press and

hold SEARCH on the weather station. The weather station repeats search for

the sensor signal.

4.The sensor is waterproof to dripping water from upside, however, it should not

be exposed to rain permanently.

5.Do not place the sensor on metallic object , otherwise it will reduce its

transmission range.

6.If low battery icon is displayed, replace batteries in the sensor or weather

station.

Note: Batteries in the weather station are used as a backup of the readings/set

values. If AC power supply is disconnected, with no batteries inserted, all data

will be lost.