Cashmaster Sigma 105 빠른 시작 매뉴얼 - 페이지 2
{카테고리_이름} Cashmaster Sigma 105에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cashmaster Sigma 105 2 페이지.
Cashmaster Sigma 105에 대해서도 마찬가지입니다: 자주 묻는 질문 매뉴얼 (7 페이지), 자주 묻는 질문 매뉴얼 (9 페이지), 자주 묻는 질문 매뉴얼 (6 페이지), 자주 묻는 질문 매뉴얼 (9 페이지), 빠른 시작 매뉴얼 (2 페이지)
페이지 인쇄
Getting Started
1. Place the Cashmaster on a firm even surface, ensure the tray is empty, press
2. Place empty scoop on scale. If prompted to do so.
3. You are now in count mode.
Loose Coins
Ensure that the display indicates coin counting mode.
Press either
1. Place all coins of your selected denomination in the scoop and onto the tray.
2a. If auto-add is on, remove the scoop from the tray, and advance to the next denomination.
2b. If auto-add is off, press the
next denomination.
Rolled Coins
Ensure that the display indicates Rolled Coins counting mode.
Press the coins/bill
1. Place a roll of coins on the tray.
2a. If the roll is "full" the Cashmaster will display the value. Go to step 3
Press to
2b. If there is "crossover" or the roll is not "full". You must then select the denomination of coin
select
Rolled
coins
mode
3a. If auto-add is on and the roll is "full" the cashmaster will automatically add to total.
3b. If auto-add is on, and the roll is not full, press
3c. If auto-add is off, press the
Advance to the next denomination.
Loose Bills
Ensure that the display indicates bill counting mode.
Press either
1. Place bills of the selected denomination on the tray (up to 30 at one time). Repeat until all
bills in denomination are on the tray.
2a. If auto-add is on, remove bills from the tray.
2b. If auto-add is off, press
denomination.
Advance to the next denomination
10229A
key to select note counting mode and required the denomination.
key to select Rolled Coins counting mode.
using the
. Press the
key to select note counting mode and required the denomination.
Customer Support (Toll Free): 1 - 877 - CASHMAS
www.cashmaster.com
key to add to total, remove the scoop and advance to the
key to confirm. Go to step 3.
key to accept and add total.
key to accept the value and add the grand total.
key to add to total, remove the bills and advance to the next
@
.
key.