Danfoss VLT AutomationDrive FC 301 설치 매뉴얼 - 페이지 9

{카테고리_이름} Danfoss VLT AutomationDrive FC 301에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss VLT AutomationDrive FC 301 16 페이지. 24 v dc supply
Danfoss VLT AutomationDrive FC 301에 대해서도 마찬가지입니다: 설치 매뉴얼 (20 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 매뉴얼 (18 페이지), 설치 지침 매뉴얼 (8 페이지), 설치 매뉴얼 (6 페이지), 설치 매뉴얼 (16 페이지), 설치 매뉴얼 (8 페이지), 설치 지침 매뉴얼 (6 페이지)

Installation Guide | VLT® Programmable I/O MCB 115

Procedure

1. Remove the LCP, the terminal cover, and the LCP frame from the drive.

2. Fit the option into slot B.

3. Connect the control cables and relieve the cable. See

4. Remove the knockouts in the extended LCP frame (supplied).

5. Fix the extended LCP frame and terminal cover on the drive.

6. Fit the LCP or blind cover in the extended LCP frame.

7. Connect power to the drive.

8. Set up the input/output functions in the corresponding parameters.

1 LCP

3 Slot B

5 LCP frame

Illustration 1:

Installation in Enclosure Sizes A2, A3, and B3

3.3 Mounting the Option in Enclosure Sizes A5, B1, B2, B4, C, D, E, and F

Context:

The installation procedure depends on the enclosure size of the drive. This procedure is for installation in enclosure sizes A5, B1, B2, B4,

C, D, E, and F.

3.4.1 Specifications

for wiring details.

2 Terminal cover

4 Option

AN295938195323en-000101 / 130R0655| 9

Installation