Cashmaster OMEGA C Fast Charge Series 1000 사용 설명서 - 페이지 10

{카테고리_이름} Cashmaster OMEGA C Fast Charge Series 1000에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cashmaster OMEGA C Fast Charge Series 1000 12 페이지. Coin and note counting machine

7. Setting the starting bank

Press and hold down the <F> key and at the same time press the bills < > key.
The display will show the current bank amount stored.
FLOAT VALUE
$50.00
Press any of the following keys to change the bank displayed:
bills < > to increase by $50
bills < > to decrease by $50
Press <F> to save the selected starting bank and return to loose coin counting.
The selected starting bank will appear in the top left of the display.
- 100.00
Starting bank
1c
The bank amount is now stored in memory and, unless it needs to be altered in the
future, need not be entered again.
The Omega "C" is now ready to begin loose coin counting in starting bank mode.
Page 10
coin < > to increase by $5
coin < > to decrease by $5
SCOOP
Roll Stacking-
This feature allows the you to count all your rolls in one go, regardless of denomi-
nation.
Firstly, ensure Rolled Coin Verify mode is selected:
0.00
Auto
Simply apply one roll at a time, and wait for the Omega "C" to verify the roll before
applying the next. You do not have to remove the previous roll before adding the next
one.
Ensure "Verify Rolls"
mode is selected, and
hod is empty.
$ 1
50c
Add next roll to Omega.
There is no need to re-
move the previous roll.
To add the value of the rolls to the Grand Total, press the <+> key. If Auto Addis
enabled, simply remove the rolls to add the value. (Note: They do not have to be re-
moved all at once)
VERIFY
ROLLS
50c
Apply first roll. If roll
is good, Omega should
verify as usual.
5c
1c
25c
$ 1
50c
Continue adding rolls
until all are applied.
Page 15