CashTester BC 242 SD 매뉴얼 - 페이지 5
{카테고리_이름} CashTester BC 242 SD에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CashTester BC 242 SD 20 페이지.
페이지 인쇄
ADD function
Press ADD to activate the ADD function (ADD will appear in the display). Now multiple stacks of banknotes
can be counted after each other and these will all be cumulated. Counting will begin and continue until
either all notes are counted. Would the cumulative quantity of banknotes counted reach 100,000 or the
total value of 100,000,000, the number will reset automatically to 0.
Count report
After counting has finished in mix mode, both the total value and the total number of genuine banknotes
that have been counted, are shown on the display. To view a more detailed counting result, press the
REPORT button. To turn page in the count report, press the REPORT button again.
Print report
To print a more detailed counting result (of the banknote quantity and value per denomination) an
optional available printer must be connected. Press and hold the PRINT button for 2 seconds to print.
Settings
To enter the user menu and set up the counter, press the MENU key when the main screen is shown. In this
menu navigation is done by pressing MODE (▲) and REPORT (▼). START confirms and MENU is used to exit
the user menu.
Beep setup (audio signals)
Language
Date Format
1.
Highlight the 'Date Format' option.
2.
Press CUR or PRINT key to change date format.
3.
Press START key to confirm. Or press MENU key to exit
PAGE 5 OF 20
1. Highlight the 'Beep Setup' option.
2. Press START key to confirm.
3. Highlight the desired item.
4. Press CUR or PRINT key to change
between on and off.
5. Press MENU key to exit.
1. Highlight the 'Language' option.
2. Press START key to confirm.
3. Highlight the desired language*.
4. Press START key to confirm. Or press
MENU key to exit.
*Shown languages are only for indicating
purposes