CashTester CC 604 사용자 설명서 - 페이지 5
{카테고리_이름} CashTester CC 604에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CashTester CC 604 13 페이지. Coin counter
CashTester CC 604에 대해서도 마찬가지입니다: 사용자 설명서 (5 페이지)
페이지 인쇄
3.2 Error messages and solutions
In case of an error, the number is shown bottom right in the display.
Error
Problem
code
1
Infrared in the channel 1 (1 cent)
2
Infrared in the channel 2 (2 cent)
3
Infrared in the channel 3 (10 cent)
4
Infrared in the channel 4 (5 cent)
5
Infrared in the channel 5 (20 cent)
6
Infrared in the channel 6 (1 Euro)
7
Infrared in the channel 7(50 cent)
8
Infrared in the channel 8 (2 Euro)
9
Infrared in the hopper.
3.3 Brush setting / replacement
The brush must be replaced every 900.000 coins counted/sorted. To check this number, switch the
counter OFF: now hold REP and – and switch it back ON again and the number will appear bottom right
in the display. Press START/STOP to exit this menu.
The CC 604 comes with the brush fixed on position 1.
When 400.000 coins passed, the display shows POS 2:
to guarantee the correct pressure (which means
correct countings), you must switch the brush to
position 2 now. Turn off the CC 604 and open the
cover: switch the brush to position 2 (press and turn).
Close and secure the lid, turn the machine back on
and delete the message in the display by pressing
together REP and -.
When the quantity of counted coins exceeds 900.000 coins, the LCD will display BRUSH. You must
replace the brush now to assure correct counting/sorting. After replacement, hold REP and – and turn
back on the CC 604. Now clear the counted number and message 'BRUSH' by pressing CLEAR.
ATTENTION: clearing this number is definitive and can't be undone.
3.4 Technical specifications
Display
Coin Boxes
Hopper capacity
Counting speed
Consumption
Power supply
Dimension
Weight
Solution
Clear the dust on the IR sensor or replace IR emitter board in the
channel 1
Clear the dust on the IR sensor or replace IR emitter board in the
channel 2
Clear the dust on the IR sensor or replace IR emitter board in the
channel 3
Clear the dust on the IR sensor or replace IR emitter board in the
channel 4
Clear the dust on the IR sensor or replace IR emitter board in the
channel 5
Clear the dust on the IR sensor or replace IR emitter board in the
channel 6
Clear the dust on the IR sensor or replace IR emitter board in the
channel 7
Clear the dust on the IR sensor or replace IR emitter board in the
channel 8
Clear the dust on the IR sensor or replace IR emitter board in the
hopper
LCD
8
1000 pieces (mixed coins)
Approx. 500 pieces/min (mixed coins)
60W (max)
AC 100-240V, 50/60HZ
598*340*434 mm
6.85 KG
Cashtester CC 604
- 5 -