Danfoss VLT CANopen MCA 105 설치 매뉴얼 - 페이지 9

{카테고리_이름} Danfoss VLT CANopen MCA 105에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss VLT CANopen MCA 105 16 페이지.

Installation

3.5 Mounting

Check whether the fieldbus option is already

mounted in the frequency converter. If already

mounted, go to step 6. If not mounted, go to

step 2.

Remove the LCP or blind cover from the

frequency converter.

Use a screwdriver to remove the front cover and

the LCP cradle.

Mount the fieldbus option. Mount the option

with the connector facing up for top cable entry

(see Illustration 3.3), or with the connector facing

down for bottom cable entry (see Illustration 3.4).

If an MCB option is installed, only top cable entry

is possible.

Remove the knock-out plate from the new LCP

cradle.

Mount the new LCP cradle.

LCP

LCP cradle

Fieldbus option

Connector

Illustration 3.2 Exploded View

MG33J402

Installation Guide

Illustration 3.3 Top Cable Entry: Option Mounted with

Connector Facing Up

Illustration 3.4 Bottom Cable Entry: Option Mounted with

Connector Facing Down