Dundalk LeisureCraft Islander 조립 지침 매뉴얼 - 페이지 3

{카테고리_이름} Dundalk LeisureCraft Islander에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dundalk LeisureCraft Islander 6 페이지.

Door Unit Assembly:

Get all parts for door unit and lay them out on a flat surface so that the track is at the top and facing up . Fixed doors go at either end

and have a 2"x3" added to the sides for fastening to corner unit.

Set the door unit flush with centre spacer (on top heatder) ... Fig. A

Fasten down through top and up through the bottom. Use 2½" screws and fit into pre-drilled holes.

* Note: The top rail is longer than the bottom rail in order to accommodate the corner window.

Set both slider doors onto track and into groove at the bottom. Fig. B

Set the second fixed door into place and fasten. Use 2½" screws and fit into pre-drilled holes. (Fig. C)

Set these assemble door units aside and proceed to wall panel assembly.

Fig. A

Fig. C

Fig. B