Dundalk LeisureCraft Cedar Hot Tub 조립 설명서 - 페이지 7

{카테고리_이름} Dundalk LeisureCraft Cedar Hot Tub에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dundalk LeisureCraft Cedar Hot Tub 12 페이지.

By trial and error, position the three assembled benches

into the tub, spacing them equally apart, until you're sure

that the 2" screws will not be driven into any seams

between staves as this will cause a leak.

Fig. 10.1.4 Position the benches so that no screws will be

driven into any seams between staves.

10.2: Heater

Put a bead of silicone caulking under the flange of the

heater hose fitting, and fasten it with three supplied

mounting screws as shown.

Fig. 10.2.1 Fasten heater hose fitting.

Fig. 10.2.2 Attach heater hoses with gear clamps

Hook up the heater to the hoses and assemble the stack

pipes on top. See manufacturer's instructions for more

detail.

Fig. 10.2.3 Assembling the heater stack.

10.3 Steps:

If you purchased steps from us, they are intended to be

placed next to the tub and are held in place with two 2"

stainless screws through brackets under the top step. Drive

the screws through the bracket under the top step and into

the tub, avoiding cracks.

Fig. 10.3.1 Steps, Tub, Heater