Danfoss BasicPlus2 WT-P 설치 매뉴얼 - 페이지 3

{카테고리_이름} Danfoss BasicPlus2 WT-P에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss BasicPlus2 WT-P 8 페이지. Room thermostats

Installation Guide

2. When power supply location is close to actuator:

• Connect to actuator TWA 230 V NC type, see fig. 8.

• Connect to actuator TWA 230 V NO type, see fig. 9.

3. Error codes

Room sensor failure

Floor sensor failure

4. Notes

1. Correct wiring is essential; using instrument to con-

firm L and N before wiring is recommended.

2. Don't remove too much of the insulation cover from

the wire to avoid short circuit caused by the naked

wire touching the metal 86 size mounting wall box.

3. Don't let the screw press or touch the wire when

using screw to fix room thermostat in wall box. A

short-circuit risk exists if the wire insulation cover is

damaged by the screw, and if the naked wire con-

nects with the screw.

4. If walls must be painted, mount the room thermostat

after painting, to avoid dust or paint material pen-

etrating the room thermostat and thus damaging

the PCB.

Danfoss Heating Solutions

BasicPlus

WT-D & WT-P

VICUJ212