Danfoss DEVI 140F1073 설치 매뉴얼 - 페이지 5

{카테고리_이름} Danfoss DEVI 140F1073에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss DEVI 140F1073 12 페이지. Electronic thermostat +5 to +45 c
Danfoss DEVI 140F1073에 대해서도 마찬가지입니다: 설치 매뉴얼 (12 페이지)

페이지 인쇄

DEVIreg™ 330 (+5 to +45°C)

Protection class

Dimensions

Weight

The product complies with the EN/IEC Standard "Automatic

electrical controls for household and similar use":

• EN/IEC 60730-1 (general)

• EN/IEC 60730-2-9 (thermostat)

1.2

Safety Instructions

Make sure the mains supply to the thermostat is turned off

before installation.

IMPORTANT: When the thermostat is used to control a

floor heating element in connection with a wooden floor or

similar material, always use a floor sensor and never set the

maximum floor temperature to more than 35°C.

Please also note the following:

• The installation of the thermostat must be done by an

authorized and qualified installer according to local

regulations.

• The thermostat must be connected to a power supply

via an all-pole disconnection switch.

• The sensor is to be considered as live voltage. Have this

in mind if the sensor must be extended.

Installation Guide

Class II

86 x 36 x 58 mm

83 g