Danfoss DEVI DEVIreg 532 설치 매뉴얼 - 페이지 7

{카테고리_이름} Danfoss DEVI DEVIreg 532에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss DEVI DEVIreg 532 16 페이지.

DEVIreg™ 532

• Place the floor sensor in a conduit in an appropriate

place where it is not exposed to sunlight or draft from

door openings.

• Equally distant and >2cm from two heating cables.

• The conduit should be flush with the floor surface -

countersink the conduit if necessary.

• Route the conduit to the connection box.

• The bending radius of the conduit must be min 50mm.

Installation Guide

Always install the thermostat at least 50 cm.

from windows and doors.

Do not place the thermostat in a way that

it will be exposed to direct sunlight.

Note: A floor sensor enables a more accurate

temperature control and is recommended

in all floor heating applications

and mandatory under wooden floors to

reduce the risk of over-heating the floor.