Casio 2555 운영 매뉴얼

{카테고리_이름} Casio 2555에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Casio 2555 5 페이지.

페이지 인쇄

MO0311-EA

About This Manual

General Guide

• Press C to change from mode to mode.

• In any mode, press B to illuminate the display.

Timekeeping Mode

Radio-controlled Timekeeping

This watch receives a time calibration signal and updates its time setting accordingly.

The time calibration signal includes both Standard Time and Daylight Saving Time

(summer time) data.

• In the Timekeeping Mode, press D to display the Last Signal screen. The Last

Signal screen shows the date and time of the last successful time cailbration signal

reception.

Month – Day

Hour : Minutes Seconds

indicator

Day of week

• This watch is designed to pick up the time calibration signal transmitted from Rugby,

England and the signal from Mainflingen, Germany.

Current Time Setting

This watch automatically adjusts its time setting in accordance with a time calibration

signal. You can also perform a manual procedure to set the time and date, when

necessary.

• The first thing you should do after purchasing this watch is to set your Home City,

which is the city where you will normally use the watch. For more information, see

"To set your Home City" below.

• When using the watch that is outside of the range of the transmitters in Rugby and

Mainflingen, you need to manually adjust the time as required. See "Timekeeping"

for information about manual settings.

To set your Home City

City code

Important!

• Normally, your watch should show the correct time as soon as you select your Home

City code. If it does not, it should adjust automatically after the next auto receive

operation (in the middle of the night). You can also perform manual receive or you

can set the time manually.

• If you are in an area that does not use Daylight Saving Time (summer time), turn off

the DST setting.

• See "Transmitters" for details about the transmitter indicator.

Time Calibration Signal Reception

There are two different methods you can use to receive the time calibration signal:

auto receive and manual receive .

• Auto Receive

With auto receive, the watch automatically picks up the time calibration signal five

times a day at 0:00 a.m., 1:00 a.m., 2:00 a.m., 3:00 a.m., and 4:00 a.m. For more

information, see "About Auto Receive".

• Manual Receive

Manual receive lets you start a time calibration receive operation with the press of a

button. For more information, see "To perform manual receive".

Operation Guide 2555 2868

• Button operations are indicated using the letters shown

in the illustration.

• Each section of this manual provides you with the

information you need to perform operations in each

mode. Further details and technical information can be

found in the "Reference" section.

World Time Mode

Press C.

Alternate at the

2-second interval

Press D.

Receive date

Last Signal Screen

1. In the Timekeeping Mode, hold down A until the

transmitter indicator (

A/T

MSF

, or

DCF

flash, which indicates the setting screen.

• If the displayed transmitter indicator shows something

, use D to display

other than

A/T

advancing to the next step.

2. Press C to display the city code setting screen.

3. Use D(east) and B(west) to select the city code you

want to use as your Home City.

• The following are the city codes for major cities in the

Western Europe time zones.

LON

: London

PAR

and

BER

: Paris, Berlin, Milan, Rome,

Amsterdam, Hamburg, Frankfurt, Vienna,

Barcelona, Madrid

4. Press A to exit the setting screen.

Alarm Mode

Stopwatch Mode

Important!

• Position the watch as shown in the nearby illustration, with its 12 o'clock side facing

towards a window. Make sure there are no metal objects nearby.

Receive time

• The watch should not be on its side or facing the wrong way.

• Proper signal reception can be difficult or even impossible under the conditions listed

below.

Inside or

among

buildings

• Signal reception is normally better at night than during the day.

) starts to

• Time calibration signal reception takes from two to five minutes, but in some cases it

can take as long as 14 minutes. Take care that you do not perform any button

operations or move the watch during this time.

before

1,500 kilometers

Rugby

500 kilometers

• This watch is designed to receive the time calibration signal transmitted from Rugby,

England and the signal from Mainflingen, Germany. Signal reception is possible

within the area represented by a circle with a radius of about 1,500 kilometers.

• At distances further than about 500 kilometers from a transmitter, signal reception

may not be possible during certain times of year or times of day. Radio interference

may also cause problems with reception.

• See the information under "Signal Receive Troubleshooting" if you experience

problems with time calibration signal reception.

About Auto Receive

When auto receive is turned on, the watch automatically starts to receive the time

calibration signal when the time in the Timekeeping Mode reaches 0:00 a.m., 1:00

a.m., 2:00 a.m., 3:00 a.m., and 4:00 a.m. each day (calibration times). The watch will

also perform an additional auto receive operation at 5:00 a.m. if none of regularly

scheduled auto receive operations are successful.

Date Alert Mode

Time Recorder Mode

Resin Band

Metal Band

Inside a

Near

Near a

Near high-

vehicle

household

construction

tension

appliances or

site, airport, or

power lines

office

other sources

equipment,

of electrical

or a mobile

noise

phone

Among or

behind

mountains

Mainflingen