Casio 2568 사용자 설명서

{카테고리_이름} Casio 2568에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Casio 2568 5 페이지.
Casio 2568에 대해서도 마찬가지입니다: 사용자 설명서 (5 페이지)

페이지 인쇄

Getting Acquainted

Congratulations upon your selection of this CASIO watch. To get the most out of your

purchase, be sure to carefully read this manual and keep it on hand for later reference

when necessary.

Expose the watch to bright light to charge its battery before using it.

You can use this watch even as its battery is being charged by exposure to bright

light.

• • • • • Be sure to read "Battery" of this manual for important information you need

to know when exposing the watch to bright light.

If the display of the watch is blank...

If the Power Saving on (S) indicator flashes on the

display, it means that the display is blank because the

watch's Power Saving function has turned off the

display to conserve power. Power Saving automatically

turns off the display and puts the watch into a sleep state

whenever your watch is left for a certain period where it

is dark.

• The initial factory default setting is Power Saving on.

• The watch recovers from the sleep state if you move it

to a well-lit area

angle the watch towards your face for reading.

It can take up to five seconds for the display to turn on.

• • • • • See "Power Saving function" for more information.

General Guide

• Press C to change from mode to mode.

• In any mode (except when a setting screen is on the display), press B to illuminate

the display.

Timekeeping Mode

Countdown

Timer Mode

Timekeeping

Use the Timekeeping Mode to set the time and date.

Day of week

Month – Day

Year

Note

This watch is capable of displaying text for the day of the

week in any one of 16 different languages (English,

Portuguese, Spanish, French, Dutch, Danish, German,

Italian, Czech, Swedish, Polish, Greek, Romanian,

Turkish, Russian, and Japanese).

Hour : Minutes Seconds

To set the time and date

1. In the Timekeeping Mode, hold down A until the

PM indicator

seconds start to flash, which indicates the setting

Language indicator

screen.

2. Use C to move the flashing in the sequence shown

below to select other settings.

Seconds

DST on/off

Language

Day

• The currently selected language indicator flashes on the display while the

Language (setting) is selected in the above sequence.

3. When the setting you want to change is flashing, use B and D to change it as

described below.

To change this setting

Perform this button operation

Press D to reset to 00.

Seconds

Press D to toggle between Daylight Saving Time

DST on/off

(ON displayed) and standard time (OF displayed).

Hour, Minutes, Year,

Use D (+) and B (–) to change the setting.

Month, Day

Use B and D to change the language setting.

Language

• While the language indicator is flashing on the display, use B and D to cycle

through the language indicators as shown below, until the one for the language

you want to select is displayed.

Press D.

Indicator Language

English

Portuguese

Spanish

French

Dutch

Press B.

Danish

4. Press A to exit the setting screen.

• The day of the week is automatically displayed in accordance with the date (year,

month, and day) settings.

• See the "Day of the Week List" for information on abbreviations used.

USER'S GUIDE 2568

, if you press any button, or if you

Press C.

Stopwatch Mode

Hour

Minutes

Month

Year

Indicator Language

German

Romanian

Italian

Turkish

Czech

Russian

Swedish

Japanese

Polish

Greek

About This Manual

• Button operations are indicated using the letters shown

in the illustration.

• Each section of this manual provides you with the

information you need to perform operations in each

mode. Further details and technical information can be

found in the "Reference" section.

World Time Mode

Day Counter Mode

• In addition to the day of the week display, the language setting also affects the type

of characters you can input for the name in the Data Bank Mode and the text in the

Day Counter Mode.

• Holding down A in the Timekeeping Mode displays the indicator for the currently

selected language. Keeping A depressed for about two seconds changes to the

Timekeeping Mode setting screen (indicated by the seconds flashing). If you

accidentally display the setting screen, press A again to exit.

To toggle between 12-hour and 24-hour timekeeping

In the Timekeeping Mode, press D to toggle between 12-hour timekeeping (indicated

by A or P on the display), or 24-hour timekeeping.

• With the 12-hour format, the P (PM) indicator appears on the display for times in the

range of noon to 11:59 p.m. and the A (AM) indicator appears for times in the range

of midnight to 11:59 a.m.

• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without

any indicator.

• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all modes.

Daylight Saving Time (DST)

Daylight Saving Time (summer time) advances the time setting by one hour from

Standard Time. Remember that not all countries or even local areas use Daylight

Saving Time.

To toggle the Timekeeping Mode time between DST and Standard Time

1. In the Timekeeping Mode, hold down A until the

DST indicator

seconds start to flash, which indicates the setting

screen.

2. Press C to move the flashing to the DST on/off setting.

3. Press D to toggle between Daylight Saving Time (ON

displayed) and standard time (OF displayed).

4. Press A to exit the setting screen.

• The DST indicator appears on the display to indicate

that Daylight Saving Time is turned on in the

Timekeeping, Alarm, and Day Counter Mode.

World Time

The World Time shows the current time in 28 cities (29

Timekeeping

UTC

time zones) around the world.

mode time

differential

• The time settings of the Timekeeping Mode and the

City code

World Time Mode are independent from each other, so

you must make separate settings for each.

• Whenever you change the time setting for any city in the

World Time Mode, the settings of all other cities are

changed accordingly.

• The UTC differential value indicates the number of hours

difference in time between the currently selected time

zone and UTC.

Current time in

• All of the operations in this section are performed in the

the selected city

World Time Mode, which you enter by pressing C.

code

Data Bank Mode

Alarm Mode