Dunelm 30151290 매뉴얼

{카테고리_이름} Dunelm 30151290에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dunelm 30151290 3 페이지.

DEAR CUSTOMER
Thank you for purchasing your new piece of furniture from Dunelm.
We put a lot of e ort in the design and construction of our products to ensure they set the
standard for quality, durability and ease of assembly.
If for any reason you feel we haven't lived up to the high standards we set ourselves, please
don't hesitate in contacting us on 08451 656565 where our team will be very keen to
understand what has gone wrong and, more importantly, put it right.
The next step...
There is no need to feel daunted by the number of parts and ttings in front of you, we have compiled
this straight forward, step-by-step guide to make sure that assembling your furniture is as easy as 1, 2,
3.
Before you begin, we advise that you check that you have everything you need to get started.
TOP TIP
Find a space to spread these out across the oor before you begin assem-
bling them. Lay each panel down in position, ready to build.
It is recommended that two people assemble this product together.
The full list of furniture parts, xtures and ttings, as well as the tools you will need for assembly, can be
found on page 2 of this manual.
TOP TIP
Identify all of the ttings, make sure that you have them all prepared and
familiarise yourself with each component, to make things easier when you
are putting it all together.
Safety and Care Advice
IMPORTANT - The rst step you need to take is to ensure your safety!
Please take the time to read and understand these instructions before assembling your furniture.
Keep children and animals away from the assembly area.
This furniture contains small parts that could cause choking if swallowed.
Keep all plastic wrapping materials away from children to avoid danger of su ocation.
Ensure that all packaging is disposed of carefully and responsibly.
Make sure that you allow enough space to move around when assembling your furniture.
The use of power tools to assemble the product is not recommended due to the risk of over
tightening xings.