Danfoss DEVIreg Multi 설치 매뉴얼 - 페이지 7

{카테고리_이름} Danfoss DEVIreg Multi에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss DEVIreg Multi 16 페이지. Self-limiting cables on drum
Danfoss DEVIreg Multi에 대해서도 마찬가지입니다: 설치 매뉴얼 (12 페이지)

페이지 인쇄

DEVIreg™ 530M

By connecting an external timer to the terminal marked by

a moon symbol (and by using for example the same phase

as for the mains power supply), the thermostat can be set

to reduce the temperature by 5ºC during specified periods.

The screen of the heating cable must be connected to

the earth conductor of the power supply cable by using a

separate connector.

Note: Always install the floor sensor in a conduit in the floor.

3. Mount and reassemble the thermostat.

• Fasten the thermostat to a socket or an exterior wall

box by driving the screws through the holes in each

side of the thermostat.

• Install the frame and front cover in the reverse order of

disassembly.

4. Turn on the power supply.

Installation Guide