3T-Components 3T-MOTORS 3T45-10R 설치 및 운영 지침 매뉴얼 - 페이지 8

{카테고리_이름} 3T-Components 3T-MOTORS 3T45-10R에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3T-Components 3T-MOTORS 3T45-10R 20 페이지. Radio shutter / awning motors with mechanical limit switches
3T-Components 3T-MOTORS 3T45-10R에 대해서도 마찬가지입니다: 설치 및 운영 지침 매뉴얼 (20 페이지)

3T-Components 3T-MOTORS 3T45-10R 설치 및 운영 지침 매뉴얼
INSTALLATION INSTRUCTIONS
Motor type 3T45-R
Installation with universal bearing or cover cap bearing
Universal bearing
Installation with universal bearing:
Push the motor with the square into the opening of the bearing
and secure with cotter pin.
Installation with cover cap bearing:
Remove screws from metal plate on motor head
Remove metal plate
>
fig. 2.2
Remove motor square spigot
>
fig. 2.3
Reattach metal plate
>
fig. 2.4
2.1
2.3
Slide motor type 3T45-R without square spigot into cover cap bearing
and secure with both securing clips.
Cover cap bearing
Cotter pin
>
fig. 2.1
2.2
Square spigot
2.4
Securing clips
Motor type 3T35-R
Installation with universal bearing or clip bearing
Universal bearing
Installation with universal bearing:
Push the motor with the square into the opening of the bearing
and secure with cotter pin.
Installation with clip bearing:
Remove screws from metal plate on motor head
Remove metal plate
>
fig. 2.6
Remove motor square spigot
>
fig. 2.7
Reattach metal plate
>
fig. 2.8
2.5
Square spigot
2.7
Engage motor type 3T35-R without square spigot in clip bearing.
3T-MOTORS Radio tubular motors | Installation instructions
clip bearing
Cotter pin
>
fig. 2.5
2.6
2.8
8