Casio 2734 운영 매뉴얼

{카테고리_이름} Casio 2734에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Casio 2734 5 페이지.

페이지 인쇄

MO0612-EA

Operation Guide COMBIWVGE1

About This Manual

• The operational procedures for Modules 2734, 2758, 3748, 3749, 4773, and 4774

are identical. All of the illustrations in this manual show Modules 2734 and 2758.

• Button operations are indicated using the letters shown in the illustration.

Modules 2734 and 2758

• Each section of this manual provides you with the information you need to perform

operations in each mode. Further details and technical information can be found in

the "Reference" section.

General Guide

• Press C to change from mode to mode.

• In any mode, press B to illuminate the display.

Timekeeping Mode

Radio-controlled Timekeeping

Hour hand

Minute hand

Day of week

Month – Day

• When using the watch that is outside of the range of the transmitters in Rugby and

Mainflingen, you need to manually adjust the time as required. See "Timekeeping"

for information about manual settings.

• The analog time of this watch is synchronized with the digital time. Because of this,

the analog time setting is automatically adjusted whenever you change the digital

setting. See "Analog Timekeeping" for more information.

To set your Home City

City code

• The following are the city codes for major cities in the Western Europe time

zones.

LON

: London

PAR

and

BER

: Paris, Berlin, Milan, Rome, Amsterdam, Hamburg, Frankfurt,

Vienna, Barcelona, Madrid

4. Press A twice to exit the setting screen.

• The first press of A displays the 12/24-hour setting screen. Pressing A again exits

the setting screen.

Important!

• Normally, your watch should show the correct time as soon as you select your Home

City code. If it does not, it should adjust automatically after the next auto receive

operation (in the middle of the night). You can also perform manual receive or you

can set the time manually.

• If you are in an area that does not use Daylight Saving Time (summer time), turn off

the DST setting.

• See "Transmitters" for details about the transmitter indicator.

Time Calibration Signal Reception

There are two different methods you can use to receive the time calibration signal:

auto receive and manual receive.

• Auto Receive

With auto receive, the watch automatically picks up the time calibration signal five

times a day at 0:00 a.m., 1:00 a.m., 2:00 a.m., 3:00 a.m., and 4:00 a.m. For more

information, see "About Auto Receive".

• Manual Receive

Manual receive lets you start a time calibration receive operation with the press of a

button. For more information, see "To perform manual receive".

Modules 3748 and 3749

Modules 4773 and 4774

World Time Mode

Press C.

Hand Setting Mode

This watch receives a time calibration signal and update

its time setting accordingly. The time calibration signal

includes both Standard Time and Daylight Saving Time

(summer time) data.

• This watch is designed to pick up the time calibration

signal transmitted from Rugby, England and the signal

from Mainflingen, Germany.

Current Time Setting

This watch automatically adjusts its digital time setting in

accordance with a time calibration signal. You can also

perform a manual procedure to set the time and date,

when necessary.

• The first thing you should do after purchasing this watch

is to set your Home City, which is the city where you will

normally use the watch. For more information, see "To

set your Home City" below.

1. In the Timekeeping Mode, hold down A until the

transmitter indicator (

A/T

MSF

, or

DCF

flash, which indicates the setting screen.

• If the displayed transmitter indicator shows something

, use D to display

other than

A/T

advancing to the next step.

2. Press C to display the city code setting screen.

3. Use D (east) and B (west) to select the city code you

want to use as your Home City.

Alarm Mode

Stopwatch Mode

Important!

• Position the watch as shown in the nearby illustration, with its 12 o'clock side facing

towards a window. Make sure there are no metal objects nearby.

Resin Band

• The watch should not be on its side or facing the wrong way.

• Proper signal reception can be difficult or even impossible under the conditions listed

below.

) starts to

Inside or

Inside a

among

vehicle

buildings

before

• Signal reception is normally better at night than during the day.

• Time calibration signal reception takes from two to five minutes, but in some cases it

can take as long as 12 minutes. Take care that you do not perform any button

operations or move the watch during this time.

1,500 kilometers

Rugby

500 kilometers

• At distances further than about 500 kilometers from a transmitter, signal reception

may not be possible during certain times of year or times of day. Radio interference

may also cause problems with reception.

• Even when the watch is within the reception range of the transmitter, signal

reception is impossible if the signal is blocked by mountains or other geological

formations between the watch and signal source.

• Signal reception is affected by weather, atmospheric conditions, and seasonal

changes.

• See the information under "Signal Receive Troubleshooting" if you experience

problems with time calibration signal reception.

Date Alert Mode

Time Recorder Mode

Metal Band

Near

Near a

Near high-

household

construction

tension

appliances or

site, airport, or

power lines

office

other sources

equipment,

of electrical

or a mobile

noise

phone

Mainflingen

Among or

behind

mountains