Casio 2735 운영 매뉴얼 - 페이지 5
{카테고리_이름} Casio 2735에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Casio 2735 5 페이지.
페이지 인쇄Operation Guide COMBIWAVE1
• The current time setting in accordance with the time calibration signal takes priority
over any time settings you make.
• The watch is designed to automatically update the date and day of the week for the
period January 1, 2000 to December 31, 2039. Setting of the date by the time
calibration signal cannot be performed starting from January 1, 2040.
• This watch can receive signals that differentiate between leap years and non-leap
years.
• Though this watch is designed to receive both time data (hour, minutes, seconds)
and date data (year, month, day), certain signal conditions can limit reception to time
data only.
• Normally, the signal reception date shown by the Last Signal screen is the date data
included in the received time calibration signal. When only time data is received,
however, the Last Signal screen shows date as kept in the Timekeeping Mode at the
time of signal reception.
• If you are in an area where proper time calibration signal reception is impossible, the
watch keeps time within ±20 seconds a month at normal temperature.
• If you have problems with proper time calibration signal reception or if the time
setting is wrong after signal reception, check your current city code, DST (summer
time), and auto receive settings. The following are the initial factory defaults for these
settings.
Setting
Initial Factory Default
City code
NYC
(New York)
DST (summer time)
A
(Auto switching)
DST
Auto receive
ON
(Auto receive)
R/C
Timekeeping
• Resetting the seconds to
00
while the current count is in the range of 30 to 59
causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are
reset to
00
without changing the minutes.
• The day of the week is automatically displayed in accordance with the date (year,
month, and day) settings.
• The year can be set in the range of 2000 to 2039.
• The watch's built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the date, there should be no reason to change
it except after you have the watch's battery replaced.
• The current time for all city codes in the Timekeeping Mode and World Time Mode is
calculated in accordance with the Greenwich Mean Time (GMT) differential for each
city, based on your Home City time setting.
• GMT differential is calculated by this watch based on UTC* data.
* The letters "UTC" stands for "Universal Time Coordinated," which is the world-wide scientific
standard of timekeeping. It is based upon carefully maintained atomic (cesium) clocks that
keep time accurately to within microseconds. Leap seconds are added or subtracted as
necessary to keep UTC in sync with the Earth's rotation. The reference point for UTC is
Greenwich, England.
12-hour/24-hour Timekeeping Formats
The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is also
applied in all other modes.
• With the 12-hour format, the P (PM) indicator appears on the display for times in the
range of noon to 11:59 p.m. and no indicator appears for times in the range of
midnight to 11:59 a.m.
• With the 24-hour format, times are displayed in the range of 0:00 to 23:59. The
indicator 24 indicates the 24-hour format.
Illumination Precautions
The watch has an EL (electro-luminescent) panel that causes the entire display to
glow for easy reading in the dark. In any mode, press B to illuminate the display for
about one second.
• The electro-luminescent panel that provides illumination loses power after very long
use.
• Illumination may be hard to see when viewed under direct sunlight.
• The watch may emit an audible sound whenever the display is illuminated. This is
due to vibration of the EL panel used for illumination, and does not indicate
malfunction.
• Illumination turns off automatically whenever an alarm sounds.
• Frequent use of illumination runs down the battery.
City Code Table
City
GMT
City
Code
Differential
– – –
–11.0
Pago Pago
HNL
Honolulu
–10.0
Papeete
ANC
Anchorage
–09.0
Nome
San Francisco, Las Vegas, Vancouver,
LAX
Los Angeles
–08.0
Seattle/Tacoma, Dawson City, Tijuana
DEN
Denver
–07.0
El Paso, Edmonton, Culiacan
Houston, Dallas/Fort Worth,
CHI
Chicago
–06.0
New Orleans, Mexico City, Winnipeg
Montreal, Detroit, Miami, Boston,
NYC
New York
–05.0
Panama City, Havana, Lima, Bogota
CCS
Caracas
–04.0
La Paz, Santiago, Port Of Spain
RIO
Rio De Janeiro
–03.0
Sao Paulo, Buenos Aires, Brasilia, Montevideo
– – –
–02.0
– – –
–01.0
Praia
GMT
Dublin, Lisbon, Casablanca, Dakar, Abidjan
+00.0
LON
London
PAR
Paris
Milan, Rome, Madrid, Amsterdam, Algiers, Hamburg,
+01.0
BER
Berlin
Frankfurt, Vienna, Stockholm
ATH
Athens
Helsinki, Istanbul, Beirut, Damascus,
CAI
Cairo
Cape Town
+02.0
JRS
Jerusalem
JED
Jeddah
+03.0
Kuwait, Riyadh, Aden, Addis Ababa, Nairobi, Moscow
THR
Tehran
+03.5
Shiraz
DXB
Dubai
+04.0
Abu Dhabi, Muscat
KBL
Kabul
+04.5
KHI
Karachi
+05.0
Male
DEL
Delhi
+05.5
Mumbai, Kolkata, Colombo
DAC
Dhaka
+06.0
RGN
Yangon
+06.5
BKK
Bangkok
+07.0
Jakarta, Phnom Penh, Hanoi, Vientiane
Singapore, Kuala Lumpur, Beijing, Taipei, Manila, Perth,
HKG
Hong Kong
+08.0
Ulaanbaatar
SEL
Seoul
Pyongyang
+09.0
TYO
Tokyo
ADL
Adelaide
+09.5
Darwin
SYD
Sydney
+10.0
Melbourne, Guam, Rabaul
NOU
Noumea
+11.0
Port Vila
WLG
Wellington
+12.0
Christchurch, Nadi, Nauru Island
• Based on data as of June 2006.
Other major cities in same time zone
5