Danfoss ECtemp 330 설치 매뉴얼 - 페이지 3
{카테고리_이름} Danfoss ECtemp 330에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss ECtemp 330 12 페이지. Electronic thermostat
Danfoss ECtemp 330에 대해서도 마찬가지입니다: 설치 매뉴얼 (12 페이지), 설치 매뉴얼 (12 페이지), 설치 매뉴얼 (16 페이지)
페이지 인쇄
ECtemp 330 (-10 to +10°C)
Table of Contents
1
Introduction . . . . . . . . . . . . . . . . . . . . . 3
1.1
1.2
2
Mounting Instructions . . . . . . . . . . . . . . . 6
3
Warranty. . . . . . . . . . . . . . . . . . . . . . . . 8
4
Disposal Instruction . . . . . . . . . . . . . . . 10
1
Introduction
ECtemp 330 is an electronic thermostat to be installed in
electric cabinets with DIN rail attachment. Used primar-
ily for controlling a lower temperature range as by frost
protection. The thermostat must be installed via an all-pole
disconnection switch. Either a wire sensor or an external air
sensor must be used to measure and control the desired
temperature.
The thermostat has a button to adjust the temperature
setting, with a scale from -10° to +10°C. An LED indicator
shows standby periods (green light) and heating periods
(red light).
More information on this product can also be found at:
ectemp.danfoss.com
Installation Guide
Technical Specifications . . . . . . . . . . . 4
Safety Instructions . . . . . . . . . . . . . . . 5
3