Additel ADT927 유지보수 및 수리 매뉴얼 - 페이지 5

{카테고리_이름} Additel ADT927에 대한 유지보수 및 수리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Additel ADT927 15 페이지. Hydraulic pressure test pump
Additel ADT927에 대해서도 마찬가지입니다: 사용자 설명서 (2 페이지), 사용자 설명서 (2 페이지), 유지 관리 지침 매뉴얼 (7 페이지)

페이지 인쇄

1.2 Pump cleaning

The inside of the pump needs to be cleaned regularly, or else contaminants may cause damage to the sealing system and could

potentially contaminate the device under test.

①

Tight the two plugs on the connection ports to make sure there is no leakage.

②

Open the Release valve and the isolation valve, then rotate the pre-pressurization handle and the high-pressure pressurization

and fine pressure adjustment handle all the way in. Please refer to picture 1.2.1.

Release valve

Isolation valve

Pre-pressurization

handle

③

Open the drain valve to drain all the liquid media out. Then disassemble the release valve needle, release valve base and the

upper cover. Please refer to picture 1.2.2

High-pressure and fine

adiustment handle

Picture.1.2.1

Release valve needle

Plugs

Release valve base

Upper cover

Drain valve

Picture.1.2.2