Danfoss living connect 설치 및 사용자 설명서 - 페이지 6

{카테고리_이름} Danfoss living connect에 대한 설치 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss living connect 20 페이지. Z-wave certified electronic radiator thermostat
Danfoss living connect에 대해서도 마찬가지입니다: 설치 및 사용자 설명서 (16 페이지), 데이터시트 (8 페이지)

페이지 인쇄

3. Installation - step by step

3.1 Preparation

living connect® is supplied with adapters for Danfoss RA valves

and valves with M30 x 1.5 (K) connections (014G0002), two

alkaline AA batteries and a 2 mm Allen key.

Inserting the batteries

Remove the battery cover and insert the two

batteries. Ensure that the batteries are correctly

inserted.

M must flash on the display before installation,

if this is not the case, see reinstallation mode

page 10.

3.2 Installing living connect®

1. Start by mounting the adapter.

2. Tighten RA adapter using the 2 mm

Allen key.

Hand-tighten K adapter (max. 5 Nm).

3. Screw the thermostat onto the

adapter and tighten by hand

(max. 5 Nm).

4. Press

for approx. 3 seconds to enter the function menu.

living connect®