Danfoss TP6000M 사용자 지침 - 페이지 5

{카테고리_이름} Danfoss TP6000M에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss TP6000M 6 페이지. Electronic programmable room thermostats

페이지 인쇄

AILY

SE INSTRUCTIONS

E) T

EMPORARY CHANGES TO PROGRAMMED TEMPERATURES

Press either

buttons to view programmed temperatues.

Note: If Off is selected this option does not operate.

Then use

button to temporarily raise temperature, a

play.

Or use

button to temporarily lower temperature, a

Reminder - Limited temperature adjustment: The amount of temperature adjustment may have

been limited by the building owner or the installer.

Reminder - Automatic cancellation of overrides: Any temporary override of temperature is

cancelled at the next event.

F) S

ELECTING

EEKEND INTO

Week-end into week day override

To temporarily copy weekend programmes into weekdays press both

and hold down for 2 seconds.

To cancel the weekend into weekday override press both

Advice:

During weekdays, this allows weekend programmes to be temporarily be copied into the current

day. The programme reverts to normal operation at the end of the day.

G) S

ELECTING

HERMOSTAT MODE

Thermostat mode options

Programmes can be permanently overridden by selecting THERMOSTAT mode, this feature is used

if fi xed temperatures are required for extended periods of operation.

1. To enter THERMOSTAT mode press both

seconds to enter WEEKDAY into WEEK END override.

2. Press both

and

buttons together for a second time and hold down for 2 seconds to enter

THERMOSTAT mode. The default setting is heat only.

3. Once in THERMOSTAT mode it is possible to select the required heating temperatures and the

thermostat operating mode, see below for setting details.

4. Use

buttons to select required heating temperature.

Advice: THERMOSTAT mode can be cancelled at any time by pressing both

together and holding down for 2 seconds. This will return the unit to normal running mode.

symbol will appear in the LCD dis-

symbol will appear in the LCD display.

EEKDAY OVERRIDE

and

buttons twice.

and

buttons together and hold down for 2

and

buttons together

and

buttons

LCD DISPLAYS

BUTTONS

and

then

and