Abus IPCB64515B 설치 매뉴얼 - 페이지 15

{카테고리_이름} Abus IPCB64515B에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Abus IPCB64515B 16 페이지.

3.3 Reset of factory default settings

Before usage of micro SD card the card must be formatted.

The plug protection serves to improve the protection against environmental influences such as

dust and moisture.

When using the connector protection, the Ethernet connector must always be

crimped. Use with pre-assembled Ethernet cables with plugs is not possible.

To operate the reset button please remove the

bottom cover on the downside of the camera.

1. Please disconnect the camera form power

connection.

2. Press the "Reset" button on the camera

and keep it pressed.

3. Now connect the power supply to the

camera (2-pin power supply or Power over

Ethernet), and hold the "Reset" button

pressed for another 30 seconds.

To install the micro-SD card please remove the

cover on the downside of the camera. The

micro-SD card slow is located under the cover.

Max. SD card size:

256 GByte