Danfoss 176F3417 설치 지침 매뉴얼 - 페이지 5

{카테고리_이름} Danfoss 176F3417에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss 176F3417 8 페이지. Inrush card kit for d1h–d8h drives vlt fc series fc 102, fc 103, fc 202, fc 302

페이지 인쇄

Installation Instructions

1.3.4 Installing the Inrush Card in D1h/D3h/Dh5/D6h Drives

To install the new inrush card, use the following steps. Refer to Illustration 1.2.

Place the new inrush card in the drive.

Fasten 5 screws (T20) in the inrush card.

Plug the cables to the following connectors on the inrush card:

•

MK1800

•

MK1802

1.3.5 Reassembling D1h/D3h/D5h/D6h Drives

After installing the new inrush card and standoffs, replace the following components in the drive. Refer to Illustration 1.1. See the

service guide for detailed instructions for each step.

Replace the DC bus rails.

Replace the power terminal mounting plate.

Replace the motor terminal block.

Replace the optional brake terminals, if present.

Replace the mains input terminal block and EMC shield.

Replace the AC input busbars and any power options, such as RFI filter or mains fuses.

Replace the power card mounting plate.

Replace the control card mounting plate.

MI39A102

Inrush Card Kit for D1h–D8h Drives

VLT

FC Series FC 102, FC 103, FC 202, FC 302