Danfoss 176F3517 설치 지침 매뉴얼 - 페이지 6
{카테고리_이름} Danfoss 176F3517에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss 176F3517 8 페이지. Inrush card kit for d1h–d8h drives vlt fc series fc 102, fc 103, fc 202, fc 302
페이지 인쇄
Installation Instructions
1.4 Installation Instructions for D2h/D4h/D7h/D8h Drives
Illustration 1.4 shows the control card mounting plate and power card mounting plate in a D-sized drive. The location of these
components is similar in D2h/D4h/D7h/D8h drives.
1
LCP (Local control panel)
2
LCP cradle
3
Control card mounting plate
Illustration 1.4 Control Card Mounting Plate and Power Card Mounting Plate
1.4.1 Accessing the Inrush Card in D2h/D4h/Dh7/D8h Drives
To access the inrush card, remove the following components from the drive. Refer to Illustration 1.4. See the service guide for
detailed instructions for each component.
1.
Remove the control card mounting plate.
2.
Remove the power card mounting plate.
6
Inrush Card Kit for D1h–D8h Drives
®
VLT
FC Series FC 102, FC 103, FC 202, FC 302
4
Screw (T20)
5
Power card
6
Power card mounting plate
Danfoss A/S © 05/2018 All rights reserved.
MI39A102