Danfoss vlt soft starter mcd 500 설치 지침 매뉴얼 - 페이지 3
{카테고리_이름} Danfoss vlt soft starter mcd 500에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss vlt soft starter mcd 500 17 페이지. Usb module
Danfoss vlt soft starter mcd 500에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (6 페이지), 설치 지침 (5 페이지)
페이지 인쇄
MCD Modbus Module Instructions
5. Network Status LED
The Network Status LED indicates the state of the
communications link between the module and the network.
LED operation is as follows:
Off
No connection or soft starter not
powered up
On
Communication active
N.B.!:
If communication is inactive, the soft starter may trip if the Communications Timeout
function has been set on the module. When communication is restored, the soft starter
will require a Reset.
MG.17.F5.02 - VLT® is a registered Danfoss trademark
LED
Flashing
Communication inactive
Network Status LED
3