Danfoss vlt soft starter mcd 500 설치 지침 - 페이지 2

{카테고리_이름} Danfoss vlt soft starter mcd 500에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss vlt soft starter mcd 500 5 페이지. Usb module
Danfoss vlt soft starter mcd 500에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (17 페이지), 설치 지침 매뉴얼 (6 페이지)

페이지 인쇄
Danfoss vlt soft starter mcd 500 설치 지침
Connection
3. Connection
MCD 200
USB Module
USB port
For the USB Module to accept serial commands, a link must be fitted across terminals A1-N2 on MCD
200 starters.
Input links are required across terminals 17 and 25 to 18 if the MCD 500 soft starter is being operated
in Remote mode. In Local mode, links are not required.
MCD 200
N.B.!:
MCD 500 parameter 3-2 selects whether the soft starter will accept Start and Stop
commands from the Serial Network Master while in Remote Mode. See the soft starter
user manual for parameter details.
MI.17.C1.02 - VLT
MCD 500
MCD 500 (Remote mode)
17, 18: Stop input
25, 18: Reset input
USB Module
USB port
®
is a registered Danfoss trademark
MCD USB Module Instructions
2