Danfoss APP 1.0 사용 설명서 - 페이지 4
{카테고리_이름} Danfoss APP 1.0에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss APP 1.0 8 페이지. Disassembling and assembling
Danfoss APP 1.0에 대해서도 마찬가지입니다: 서비스 매뉴얼 (12 페이지)
페이지 인쇄
Instruction
4
APP pump instruction APP 0.6-1.0, APP 1.5-2.5 and APP 3.0-3.5
2.4 General guidelines for calculation of
pressure losses
In order to avoid the risk of cavitation, the inlet
pressure at the pump must be in accordance
with the specifications mentioned in Data
sheet (521B0850).
2.5 General comments on
Filtration
A good filtration is vital to ensure a long and
trouble free life of the pump.
When selecting a filter or strainer, please note
that filter materials should be compatible with
water, i.e. should neither corrode or dissolve. Also
be aware of the electrochemical series of the
applied materials.
Main filter must have a fineness of 10 μm abs.
ß 10 >5000. The pressure loss across the filter
should be monitored.
180R9065 / 521B0733 / DKCFN.PI.013.C4.2T / 09.2012
The inlet line connection must be properly
tightened, as possible entrance of air will cause
cavitation.
The suction conditions can be optimized
according to below guidelines.
In smooth pipes and hoses
In smooth pipes and hoses
In 90° bends
Water tank
Must be made of corrosion-proof material such
as stainless steel or plastic and must be sealed to
prevent entrance of impurities from the environ-
ment.