Danfoss APP 16-22 분해 및 조립 지침 - 페이지 14

{카테고리_이름} Danfoss APP 16-22에 대한 분해 및 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss APP 16-22 18 페이지. Changing pistons
Danfoss APP 16-22에 대해서도 마찬가지입니다: 사용 설명서 (8 페이지)

페이지 인쇄
Danfoss APP 16-22 분해 및 조립 지침
Instruction
6.
Disassembling and
assembling of the
flush valve
14
14
Disassembling and assembling APP 11-13 and APP 16-22
1.
Unscrew the flushing valve counter
clockwise by using the pin wrench.
3.
Put a small amount of lubrication on the
thread on the plug. Screw it into the port
flange. Tighten with a torque of 30 Nm +/-
3 Nm.
180R9228 / 521B1181 / DKCFN.PI.013.A2.02 / 10.2013
2.
Remove the o-rings (green and black).
If necessary change the valve cone, spring
and plug.
It is important that if the spring is changed
it is located like on the picture.
Carefully use a screwdriver. The end of the
spring must be against the shoulder of the
valve cone.