Danfoss APP 2.5 분해 및 조립 지침 - 페이지 7

{카테고리_이름} Danfoss APP 2.5에 대한 분해 및 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss APP 2.5 12 페이지.
Danfoss APP 2.5에 대해서도 마찬가지입니다: 사용 설명서 (8 페이지)

Service guide | Disassembling and Assembling, APP 1.5-3.5

2. Change of shaft seal

Tools needed

3. Fit the hollow bush (torpedo) to the shaft.

Wet the torpedo and replacement shaft

seal with soap. Do not use silicone

grease.

Recessed

screws

1. Unscrew the 4 mounting screws and

remove the seal SAE flange.

Do not unscrew the 2 recessed screw at

this time.

2. Wet the shaft and shaft seal with

clean (filtered) soap-water. Gently lever

the shaft seal assembly free with the aid of

2 screwdrivers.

4. Slide the shaft seal over the torpedo with

the carbon seal face pointing upwards. Be

careful not to damage the carbon seal

face on the shaft seal.

180R9091| DKCFN.PI.013.EF5.02 | 521B0741| 7

Recessed

screws