Danfoss PAH 10-12.5 분해 및 조립 지침 - 페이지 13
{카테고리_이름} Danfoss PAH 10-12.5에 대한 분해 및 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss PAH 10-12.5 20 페이지.
페이지 인쇄
Service guide | Disassembling and assembling PAH 10-12.5, PAHT 10-12.5 and PAHT G 10-12.5
20. Tighten the screws to a torque of 22 Nm.
22. Wet the shaft seal with water and mount it
in the front cover. Ensure that it is pressed
to the bottom.
24. Mount the spring.
180R9095 | 521B0986 0 | DKCFN.PI.010.NA4.02| 06.2017
21. Mount the two O-rings in the flange and
the O -ring on the front cover.
23. Mount the washer with the edge pointing
upwards.
25. Fit the hollow bush onto the shaft.
13